Lantronix
Lantronix A14H0 two-in-one LTE and GNSS adhesive-mount remote antenna with coaxial cable and SMA connectors.

Lantronix A14H0 — 2-in-1 LTE + GNSS Antenna IP67, Adhesive, SMA Male

Lantronix|

MPN: A14H0

|

UPC: 783384240414

Available on Backorder
$53.95

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Free 2-3 Day Shipping within the United StatesShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty

Key Features

  • Two-in-one LTE and GNSS antenna in a single housing
  • GNSS reception for GPS, GLONASS and Galileo
  • Gain: 2.5 dBi LTE main, 2 dBi LTE diversity, 2 dBic GNSS
  • VSWR below 3 (LTE) and below 1.5 (GNSS)
  • IP67-rated housing with adhesive mounting
  • Remote design with 3 m coax and SMA male termination
  • Move the antenna out of a metal cabinet or vehicle interior with the 3 m remote lead
  • Handle cellular data and location tracking with one antenna
The Lantronix A14H0 combines LTE and GNSS antennas in a single remote unit. It suits cellular gateways, routers and trackers installed inside cabinets, control panels or vehicles, where the device itself cannot see the sky or a nearby tower. The antenna connects over 3 m of coax, so the router can stay in the enclosure while the antenna sits on a window, roof panel or the outside of the cabinet. The unit carries LTE main and LTE diversity elements along with a GNSS element for GPS, GLONASS and Galileo positioning. Lantronix rates the gain at 2.5 dBi for LTE main, 2 dBi for LTE diversity and 2 dBic for GNSS. VSWR is below 3 on the LTE side and below 1.5 on the GNSS side. With main and diversity elements, a gateway that supports LTE receive diversity can use both paths from one housing. The IP67 rating means the housing is protected against dust and temporary immersion, which suits outdoor cabinets, kiosks, vehicles and industrial sites. It mounts with adhesive, so there is no drilling beyond the cable route, and the SMA male connectors fit gateways with SMA antenna ports. Choose the A14H0 when a site needs both cellular connectivity and location data and you would rather run one weather-rated antenna than separate LTE and GPS units.

Ideal For

  • Remote antenna for cellular gateways installed in metal cabinets or control panels
  • Vehicle and fleet installations needing LTE plus GPS location
  • Outdoor kiosks, signage and remote monitoring sites
  • Industrial IoT deployments needing a weather-rated combined antenna

GNSS

Gain GNSS2 dBic (GNSS)
VSWR GNSSVSWR < 1.5 (GNSS)
ConstellationsGPS / GLONASS / Galileo

General

MPNA14H0
UPC783384240414
BrandLantronix
Product TypeTwo-in-One LTE + GNSS Antenna

Cellular

VSWR LTEVSWR < 3 (LTE)
TechnologyLTE
Gain LTE Main2.5 dBi (LTE Main)
Gain LTE Diversity2 dBi (LTE Diversity)

Physical

MountingAdhesive Remote Mount
ConnectorSMA Male
Cable Length3 m Coax
Ingress ProtectionIP67

Frequently Asked Questions

Is the A14H0 suitable for outdoor use?▾

Yes. The antenna is IP67 rated.

What gain does it provide?▾

2.5 dBi on LTE main, 2 dBi on LTE diversity and 2 dBic on GNSS.

How long is the cable and what connector does it use?▾

It is a remote antenna with 3 m of coax, terminated in SMA male.

Which satellite systems does it support?▾

GPS, GLONASS and Galileo.