Lantronix NM2-FXS-2230-SFP-201 — M.2 Fast Ethernet Fiber NIC
$561.00
Ships from and sold by A5 IT
Available on backorder — ships as soon as stock arrives
Free 2-3 Day Shipping within the United StatesShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Key Features
- 100Base-FX to SGMII SFP interface with SFP module included
- M.2 – ‘2230-D4-A-E’ bus slot with A + E keyed M.2 interface
- 100 Mbps data rate, full duplex only
- 9014 bytes max frame size with jumbo frame support
- Windows 10, 8, 8.1, and 7 (32/64 bit); Linux software support
- Wake on LAN (WOL), UEFI, and PXE boot support
Lantronix NM2-FXS-2230-SFP-201 is a M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlex™ 7070 & 7060/5060/3060 Micro PCs. It provides a fiber optic interface with a 100Base-FX to SGMII SFP Module included. The assembly consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, a fiber optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable that connects the NIC to the fiber adapter. It supports 100 Mbps full duplex operation, 9014-byte jumbo frames, Wake on LAN, Smart Load Balancing, LACP support, IPv6, UEFI, and PXE boot.
Ideal For
- Adding a 100Base-FX fiber optic interface to listed Dell OptiPlex Micro PCs
- Connecting an OptiPlex Micro PC to fiber infrastructure through the Option port adapter
- Deploying PXE boot or UEFI-supported Fast Ethernet fiber connectivity
- Using Wake on LAN and LACP support in supported OptiPlex Micro PC installations
Specifications
| Weight | 0.1 lbs. [0.05 kg] |
| Altitude | 0 – 10,000 ft |
| Bus Slot | M.2 – ‘2230-D4-A-E’ |
| Humidity | 5% to 95% (non-condensing) |
| Immunity | EN55024 |
| Standard | IEEE 802.3-2012 |
| Warranty | Lifetime |
| Data Rate | 100 Mbps (full duplex only) |
| Emissions | EN55032, FCC Part 15 Class A |
| Interface | 100Base-FX to SGMII SFP interface |
| Status Leds | LINK/ACT |
| M2 Interface | A + E keyed M.2 interface |
| Power Source | M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification) |
| Certifications | CE Mark |
| Host Interface | PCI Express |
| Link LED State | ON = Link |
| Max Frame Size | 9014 bytes |
| Ffc Cable Length | 2.99” [76 mm] |
| Software Support | Windows 10, 8, 8.1, and 7 (32/64 bit); Linux |
| M2 NIC Dimensions | 0.87” [22 mm] x 1.18” [30 mm] x 0.12” [3.08 mm] |
| Power Consumption | 120mA @ 3.3V (0.4 Watts typical without SFP module) |
| Activity LED State | Flashing = Activity |
| Storage Temperature | -40°C to 85°C |
| Operating Temperature | 0°C to +45°C |
| SFP+ Power Consumption | 330mA @ 3.3V (1 Watt typical) |
| Fiber Interface Dimensions | 1.65” [42 mm] x 2.05” [52 mm] x 0.51” [13 mm] |
Frequently Asked Questions
Which Dell OptiPlex Micro PCs is this NIC listed for?▾
It is listed for Dell OptiPlex™ 7070 & 7060/5060/3060 Micro PCs.
What is included with NM2-FXS-2230-SFP-201?▾
The assembly consists of a M.2 NIC, a fiber optic adapter for the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable. The 100Base-FX to SGMII SFP Module is included.
Which operating systems are supported?▾
Software support is listed for Windows 10, 8, 8.1, and 7 (32/64 bit); Linux.
What data rate does this NIC support?▾
The listed data rate is 100 Mbps, full duplex only.
Related Products
Lantronix KIT, Power Cable for N-GXE-POE-LC-01
Lantronix · N-POE-CBLKIT
$26.50
Out of Stock
Lantronix NM2-GXE-201 Series M.2 NIC and 1000BASE-X Open SFP Media CONVERTER, 65W
Lantronix · NM2-GXE-2230-SFP-201A
$295.00
Out of Stock
Lantronix M.2 NIC and 100BASE-FX to Sgmii SFP Media CONVERTER, 30MM
Lantronix · NM2-FXS-2230-SFP-01
$561.00
Out of Stock
Lantronix NM2-GXE-01 Series M.2 NIC and MM LC Media CONVERTER, 30MM
Lantronix · NM2-GXE-2230-LC-01
$402.80
Out of Stock
Lantronix NM2-GXE-201 Series M.2 NIC and MM LC Media CONVERTER, 30MM
Lantronix · NM2-GXE-2230-LC-201
$402.80
Out of Stock