Lantronix
Lantronix NM2-GXE-201 M.2 Gigabit Ethernet Fiber NIC with 1000Base-X Open SFP for OptiPlex 7080/7090 65W

Lantronix NM2-GXE-2230-SFP-201A — NM2-GXE-201 Series M.2 Fiber NIC

Lantronix|

MPN: NM2-GXE-2230-SFP-201A

|

UPC: 648177044276

Available on Backorder
$198.08$295.00

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty

Key Features

  • 1000Base-X open SFP interface for fiber connectivity with an SFP module sold separately
  • OptiPlex 7080/7090 65W Systems support for the listed NM2-GXE-2230-SFP-201A configuration
  • A + E keyed M.2 interface for the OptiPlex Micro PC’s M.2 slot
  • 1000 Mbps data rate with full duplex only operation
  • 9014 bytes jumbo frame support
  • Wake on LAN (WOL), PXE boot, UEFI and IPv6 support
  • 20-pin Flat Flex Cable connection between the M.2 NIC and fiber adapter
Lantronix NM2-GXE-2230-SFP-201A is an NM2-GXE-201 Series M.2 Gigabit Ethernet Fiber Network Interface Card for OptiPlex 7080/7090 65W Systems. This configuration provides a 1000Base-X Open SFP Slot for fiber connectivity; the SFP module is sold separately. The series consists of a M.2 NIC, a fiber optic adapter and a 20-pin Flat Flex Cable. The M.2 NIC installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, and the fiber optic adapter installs into the OptiPlex Micro PC’s Option port. It supports 1000 Mbps full duplex only operation, 9014-byte jumbo frames, Wake on LAN, PXE boot, UEFI, IPv6, LACP support and Smart Load Balancing.

Ideal For

  • Add a fiber optic interface to an OptiPlex 7080/7090 65W Micro PC
  • Deploy a 1000Base-X Open SFP Slot configuration where the SFP module is selected separately
  • Support fiber-to-the-desk installations using the NM2-GXE-201 Series
  • Use PXE boot, UEFI, IPv6 and Wake on LAN features on supported OptiPlex systems

Specifications

Weight0.1 lbs. [0.05 kg]
Altitude0 – 10,000 ft
Bus SlotM.2 – ‘2230-D4-A-E’
Humidity5% to 95% (non-condensing)
WarrantyLifetime
Data Rate1000 Mbps (full duplex only)
StandardsIEEE 802.3-2012
Status LEDLINK/ACT
M2 NIC Depth1.18” [30 mm]
M2 NIC Width0.87” [22 mm]
Power SourceM.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification)
M2 NIC Height0.12” [3.08 mm]
CertificationsCE Mark; Emissions: EN55032, FCC Part 15 Class B; Immunity: EN55024
Max Frame Size9014 bytes
Fiber Interface1000Base-X Open SFP Slot
Ffc Cable Length4.911” [124.74 mm]
Software SupportWindows 10, 8, 8.1, and 7 (32/64 bit); Linux
Link Act On StateON = Link
Supported SystemsOptiPlex 7080/7090 65W Systems
M2 NIC Form Factor2230-D4-A-E
Storage Temperature-40°C to 85°C
Fiber Interface Depth2.05” [52 mm]
Fiber Interface Width1.65” [42 mm]
Operating Temperature0°C to +45°C
SFP+ Power Consumption120mA @ 3.3V (0.4 Watts typical without SFP module)
Fiber Interface Height0.51” [13 mm]
Link Act Flashing StateFlashing = Activity

Frequently Asked Questions

Which OptiPlex systems is this SKU for?▾

It is listed for OptiPlex 7080/7090 65W Systems.

Is an SFP module included?▾

No. The series copy states that the open SFP version uses an SFP module sold separately.

How does the NIC install in the OptiPlex Micro PC?▾

The M.2 NIC installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, and the fiber optic adapter installs into the OptiPlex Micro PC’s Option port.

Which operating systems are supported?▾

Software support is listed for Windows 10, 8, 8.1, and 7 (32/64 bit); Linux.