Lantronix NTC-222-01-01 — EMEA 4G LTE Cat 1 Industrial IoT Router EMEA Bands
$249.00
Ships from and sold by A5 IT
Available on backorder — ships as soon as stock arrives
Free 2-3 Day Shipping within the United StatesShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Key Features
- 4G LTE Cat 1 on EMEA bands B1, B3, B5, B7, B8 and B20 (up to 10 Mbps down / 5 Mbps up on LTE FDD)
- 1 x 100Base-T Ethernet plus DB-9 serial port, software selectable between RS232 and RS485/RS422
- 3 multipurpose I/O pins, dedicated ignition input and Micro USB 2.0 OTG port
- GNSS with GPS, GLONASS, BeiDou, Galileo and QZSS for asset tracking
- IPSec (up to 5 tunnels), OpenVPN, GRE, PPTP and VRRP failover
- Linux-based Lantronix OS with SDK for custom C, Shell and LUA applications
- 8-40V DC input, -40°C to +70°C operation, IP41 enclosure with DIN rail bracket included
- Connect serial PLCs, meters and sensors over LTE without replacing field equipment, using RS232/RS485 and Modbus gateway support
The Lantronix NTC-222 (MPN NTC-222-01-01) is a 4G LTE Category 1 industrial IoT router from the NTC-220 Series, formerly NetComm Industrial IoT. This is the Europe, Middle East and Africa model. Its LTE bands are B1, B3, B5, B7, B8 and B20, so it is intended for EMEA networks rather than US carriers. For US deployments, Lantronix offers the NTC-224 for AT&T and T-Mobile and the NTC-225 for Verizon. Lantronix publishes CE and UKCA declarations of conformity for this model.
The router is built for machines rather than people. It has one 100Base-T Ethernet port and a DB-9 serial port that switches in software between 9-wire RS232 and RS485/RS422, with software-controlled termination. The I/O terminal block adds three multipurpose I/O pins. These pins handle NAMUR sensor input, 0-30V analogue input, digital input and open collector output. A Micro USB 2.0 OTG port can connect local storage. Modbus RTU/ASCII and a Modbus TCP/IP gateway supporting up to 247 slaves let it bridge legacy field equipment onto IP networks.
For vehicles and mobile assets, the NTC-222 adds:
• An ignition input
• A wide 8-40V DC supply range with ISO7637 vehicle protection
• GNSS covering GPS, GLONASS, BeiDou, Galileo and QZSS
• An operating range of -40°C to +70°C
For security, it supports IPSec (up to 5 tunnels), OpenVPN, GRE and PPTP. VRRP is available for redundant failover.
Remote management covers HTTPS web UI, SSH CLI, SNMP v1/v2/v3, TR-069, LWM2M and SMS, including over-the-air firmware upgrades. The Linux-based Lantronix OS and SDK let integrators build custom applications in C, Shell or LUA. Lantronix provides a product brief, user guide, quick start guide and software developer guide for the NTC-220 Series.
Ideal For
- Fleet and heavy-equipment telematics across Europe, the Middle East and Africa
- Modbus and serial PLC backhaul for utilities, water and energy sites
- Smart city infrastructure such as signage, lighting and traffic controllers
- Security and surveillance site connectivity with VPN back to headquarters
- Remote industrial monitoring in unattended cabinets
VPN
| Gre | GRE Tunnelling |
| Pptp | PPTP Client |
| Ipsec | IPSec tunnel termination (up to 5 tunnels) |
| Openvpn | OpenVPN (Client, Server and P2P) |
GNSS
| Constellations | GPS, GLONASS, BeiDou, Galileo, QZSS |
General
| MPN | NTC-222-01-01 |
| UPC | 9317773019179 |
| Brand | Lantronix |
| Model | NTC-222 – Europe, Middle East, Africa |
| Region | EMEA variant (not for US carrier networks) |
| Series | NTC-220 Series 4G LTE IIoT Router |
| Part Features | GNSS, SDK Support |
Cellular
| Odometer | Odometer reading available via Web-UI, CLI and SDK |
| LTE Bands | LTE Cat-1: B1, B3, B5, B7, B8, B20 |
| Nat Disable | NAT Disable for framed route configuration |
| Packet Data | Profile managed packet data connections |
| LTE Category | 4G LTE Category 1 |
| SIM Security | SIM Security Management (PIN configuration, enable and disable) |
| Band Selection | Automatic and manual cellular band selection |
| Operator Selection | Automatic and manual operator selection |
| Transparent Bridge | Transparent bridge mode using PPPoE to forward the public WAN IP to a downstream device |
Enclosure
| IP Rating | IP41 rated |
Interfaces
| USB | 1 x Micro USB 2.0 OTG with 0.5A supply capability |
| Output | Open collector output |
| Serial | 1 x DB-9 female DCE serial port, 9-wire RS232 or RS485/RS422 (software selectable) |
| Io Pins | 3 x Multipurpose I/O pins (terminal block) |
| Ethernet | 1 x 100Base-T Ethernet RJ45 port |
| Namur Input | NAMUR (EN 60947-5-6 / IEC 60947-5-6) compatible sensor input |
| Reset Button | Recessed reset button: reboot, reboot into recovery mode, reset to factory defaults |
| Digital Input | Digital input (measurement of voltage above/below threshold) |
| Analogue Input | Analogue 0V to 30V input |
| Ignition Input | 1 x Ignition digital input |
| RS-485 Termination | Software controlled termination resistors for RS485 |
Power Supply
| Input Voltage | 8-40V DC |
| Terminal Block | Field terminable screw-type terminal block included |
| Power Connector | Power input via 6-way termination block receptacle |
| Power Consumption | 6W |
| Recommended Supply | 12V 1.5A DC via terminal block |
| Vehicle Protection | Vehicle compatible protection on DC input (ISO7637) |
| Ignition Io Connector | Dedicated ignition input and 3 x I/O on 6-way connector |
Environmental
| Operating Humidity | 0% to 95% |
| Storage Temperature | -40°C to +85°C |
| Operating Temperature | -40°C to +70°C |
LED Indicators
| Leds | 8 x tri-color LEDs |
| LED Functions | Power, Network, GPS/customizable LED and 5 x Signal Strength |
| Status Display | Shows connection status, connected network type and connection errors |
Network Routing
| Vrrp | VRRP for redundant router failover |
| Routing | Static Routing, RIP (v1/v2), Port Forwarding and DMZ |
| DHCP List | DHCP list display in Web-UI |
| Custom DNS | Custom DNS server definitions |
| DHCP Relay | DHCP Relay |
| DHCP Server | DHCP Server including address reservation by MAC address |
| Dynamic DNS | Dynamic DNS |
| DHCP Options | Advanced DHCP options (42 NTP, 66 TFTP, 150, 160) |
| Modbus Frames | Modbus RTU/ASCII frames support |
| Modbus Gateway | Modbus Server TCP/IP Gateway and Client TCP/IP Agent, up to 247 slaves |
| Data Stream Manager | Data Stream Manager maps input/output ports (Serial, SMS, USB) with per-tunnel translation |
Peak Data Speed
| Edge | Max 236.8 Kbps (DL) / Max 236.8 Kbps (UL) |
| Gprs | Max 85.6 Kbps (DL) / Max 85.6 Kbps (UL) |
| Umts | Max 384 Kbps (DL) / Max 384 Kbps (UL) |
| LTE Fdd | Max 10 Mbps (DL) / Max 5 Mbps (UL) |
| LTE Tdd | Max 8.96 Mbps (DL) / Max 3.1 Mbps (UL) |
| Speed Note | Peak data speeds are model dependent |
| DC Hspa Plus | Max 42 Mbps (DL) / Max 5.76 Mbps (UL) |
SIM Card Reader
| SIM Slots | 1 x SIM card slot |
| SIM Format | Mini USIM/SIM format (2FF) |
| Soldered SIM | Optional soldered-down SIM (ETSI MFF2 DFN-8 USIM) |
Antenna Connectors
| GPS Connector | 1 x SMA connector for GPS |
| Cellular Connectors | 2 x SMA for 4G/3G/2G (1 x Main, 1 x RX Diversity) |
Firmware Management
| Multiple Images | Multiple firmware images stored with dynamic install |
| Upgrade Methods | Local via LAN or Over-The-Air (HTTPS, SNMP, TR-069, LWM2M) |
| Sms Triggered Upgrade | SMS-triggered firmware download and install from HTTPS |
Processor And Storage
| Ram | 256 MB RAM |
| Flash | 512 MB flash storage |
| Processor | 1 GHz ARM Cortex A8 |
Antenna Specifications
| VSWR | VSWR < 3.0:1 |
| Height | 201 mm |
| Maximum Gain | 4.71 dBi (NANT-00001) / 3.24 dBi (NANT-00006) |
| Frequency Range | 698-2700 MHz |
| Radome Diameter | 17 mm |
Sms Diagnostics Control
| Commands | Execute commands via SMS |
| Security | Secure SMS management with sender whitelisting and passwords |
| Status Query | Query status via SMS |
| Acknowledgements | SMS acknowledgement replies |
| Remote Configuration | Configure device remotely via SMS |
Software Development Kit
| API | API to internal Runtime Database for monitoring, configuration and control |
| Languages | ANSI C, Shell script and LUA |
| Environment | Open Linux standard development environment |
| Package Manager | Package manager built into Web-UI |
| Custom Applications | Develop and install custom software applications |
Dimensions Weight Mounting
| Weight | 221 g (254 g with bracket) |
| Dimensions | 143 mm (L) x 107 mm (W) x 34 mm (D), excluding antenna |
| Wall Mount | Wall mount in multiple orientations |
| DIN Rail Mount | DIN rail mount via included plastic bracket (TH 35 IEC60715) |
Administration Configuration
| CLI | SSH Command Line Interface |
| NTP | NTP server support for system clock sync |
| SNMP | SNMP v1/v2/v3 with cellular MIB, config and firmware download |
| Tr 069 | TR-069 Client for configuration, backup/restore and firmware upgrade |
| Web Ui | Secure web-based UI (HTTPS) |
| Sms Client | SMS Client with inbox and outbox |
| System Logs | System Status and Security Logs |
| Config Backup | Password-protected configuration backup/restore and device cloning |
| Ping Watchdog | Ping monitor watchdog (resets connection on repeated ping failure) |
| Diagnostic Logs | Diagnostic Log Viewer (remote and local) |
| Onboard User Guide | Device User Guide stored on the device |
Documentation Certifications
| Documents | NTC-220 Series Product Brief, User Guide, Quick Start Guide and Software Developer Guide |
| Certifications | CE and UKCA declarations of conformity (NTC-222), CB certificate, RoHS and REACH |
Frequently Asked Questions
Can I use the NTC-222 in the United States?▾
The NTC-222 is the Europe, Middle East and Africa variant with LTE bands B1, B3, B5, B7, B8 and B20. For US networks, Lantronix offers the NTC-224 for AT&T and T-Mobile and the NTC-225 for Verizon.
What serial standards does it support?▾
The DB-9 female DCE port is software selectable between 9-wire RS232 and RS485/RS422. It has software-controlled termination resistors for RS485, and it supports Modbus RTU/ASCII.
Is it suitable for vehicle installation?▾
Yes. It accepts 8-40V DC with ISO7637 vehicle protection and has a dedicated ignition input. Its built-in GNSS covers GPS, GLONASS, BeiDou, Galileo and QZSS.
How many VPN tunnels does it support?▾
It terminates up to 5 IPSec tunnels. It also supports OpenVPN (client, server and P2P), GRE tunnelling and a PPTP client.
Can I run my own software on it?▾
Yes. The Linux-based Lantronix OS includes an SDK for C, Shell script and LUA applications. It also has a package manager in the web UI and an API to the device's runtime database.
Related Products
Lantronix EMEA, APAC excl. Japan & China 5G Industrial IOT Gateway (RoW)
Lantronix · NTC-552-01-01
$599.00
Out of Stock
Lantronix North America 5G Release 16 Sub 6 Industrial Grade 5 Port Router with WiFi
Lantronix · NTC-551-01-01
$599.00
Out of Stock
Lantronix Accessory Bundle E225G MKII, KDC22 Power CORD, A14M0 &A21H0 X2 ANTENNA, BR351 D
Lantronix · MF16
$74.79
Out of Stock
Lantronix Accessory Bundle E228G MKII, E224, KDC22 Power CORD, 2X A22H0 A21H0, BR351
Lantronix · MF17
$70.67
Out of Stock
Lantronix Cable ACCESSORY, ETHERNET, CAT5E, 10 FOOT
Lantronix · ACC-500-110-R
$17.33
Out of Stock