Lantronix NTC-227-01-01 — Global 4G LTE Cat 1 Industrial IoT Router
$289.00
Ships from and sold by A5 IT
Available on backorder — ships as soon as stock arrives
Free 2-3 Day Shipping within the United StatesShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Key Features
- Global 4G LTE Cat 1 across 18 bands, up to 10 Mbps down and 5 Mbps up on LTE FDD
- Integrated GNSS supporting GPS, GLONASS, BeiDou, Galileo and QZSS
- 1 x 100Base-T Ethernet and 1 x DB-9 serial port, software-selectable between RS-232 and RS-485/RS-422
- 3 multipurpose I/O pins, dedicated ignition input and Micro USB 2.0 OTG
- Linux-based Lantronix OS with SDK for C, shell script and LUA applications
- IPSec (up to 5 tunnels), OpenVPN, GRE and PPTP client VPN support
- 8-40V DC input with ISO7637 vehicle protection, -40°C to +70°C operation, IP41 enclosure
- Stock one SKU for international rollouts: the NTC-227 covers 18 LTE bands spanning North American, European and Asia-Pacific allocations
The Lantronix NTC-227 (part number NTC-227-01-01) is the global model in the NTC-220 Series of 4G LTE Category 1 industrial IoT routers. It covers LTE bands B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B29, B40 and B41, with peak LTE FDD speeds of 10 Mbps down and 5 Mbps up. That band plan lets one SKU serve deployments across many regions. The router is built for telemetry, SCADA and asset-tracking links, where reliable low-bandwidth connectivity matters more than raw throughput.
The interface set is designed for field equipment. It has one 100Base-T Ethernet port and a DB-9 serial port that can be set in software to 9-wire RS-232 or RS-485/RS-422, with software-controlled RS-485 termination. There is also a Micro USB 2.0 OTG port for local storage. The terminal block adds three multipurpose I/O pins, including NAMUR-compatible sensor input, 0-30V analogue input, digital input and open-collector output. A dedicated ignition input, integrated GPS/GLONASS/BeiDou/Galileo/QZSS and odometer reading make the router well suited to vehicles and mobile machinery.
The router runs Linux-based Lantronix OS on a 1 GHz ARM Cortex A8 with 256 MB RAM and 512 MB flash. The SDK supports custom applications in ANSI C, shell script and LUA. For Modbus sites, the Modbus TCP/IP gateway handles up to 247 serial slaves, and the Data Stream Manager maps data between the serial, SMS and USB ports. VPN options are IPSec (up to 5 tunnels), OpenVPN, GRE and PPTP client.
For remote fleets, you can manage the router through HTTPS web UI, SSH CLI, SNMP v1/v2/v3, TR-069, LWM2M and SMS commands, with over-the-air firmware upgrades. The enclosure measures 143 x 107 x 34 mm and weighs 221 g. It takes 8-40V DC with ISO7637 vehicle protection and mounts on a wall or on a DIN rail using the included bracket.
Ideal For
- Vehicle and heavy-equipment telematics using GNSS, ignition sensing and odometer data
- Remote SCADA and Modbus RTU/ASCII telemetry from PLCs and meters over RS-232/RS-485
- Multi-country IoT rollouts that need one LTE Cat 1 SKU
- Smart city and security equipment backhaul in outdoor cabinets
- Custom edge data processing using the Lantronix SDK
VPN
| Gre | GRE tunnelling |
| Pptp | PPTP client for remote PPTP VPN server |
| Ipsec | IPSec tunnel termination (up to 5 tunnels) |
| Openvpn | OpenVPN (client, server and P2P) |
GNSS
| Constellations | GPS, GLONASS, BeiDou, Galileo, QZSS |
Power
| DC Input | 8-40V DC |
| Input Connector | Power input via 6-way termination block receptacle |
| Power Consumption | 6W |
| Recommended Supply | Recommended DC supply via terminal block: 12V 1.5A |
| Vehicle Protection | Vehicle-compatible protection on DC input (ISO7637) |
| Field Terminal Block | Field-terminable screw-type terminal block included |
| Ignition Io Connector | 1 x dedicated ignition input and 3 x I/O on 6-way connector |
General
| MPN | NTC-227-01-01 |
| UPC | 931777302120 |
| Brand | Lantronix |
| Model | NTC-227 – Global |
| Region | Global variant |
| Series | NTC-220 Series 4G LTE IIoT Router |
Cellular
| Odometer | Odometer reading available via Web-UI, CLI and SDK |
| Nat Disable | NAT disable for framed route configuration |
| Packet Data | Profile managed packet data connections |
| SIM Security | SIM security management (PIN configuration, enable and disable) |
| Band Selection | Automatic and manual cellular band selection |
| Operator Selection | Automatic and manual operator selection |
| Transparent Bridge | Transparent bridge mode using PPPoE to forward the public WAN IP to a downstream device |
Physical
| Weight | 221 g (254 g with bracket) |
| Dimensions | 143 mm (L) x 107 mm (W) x 34 mm (D), excluding antenna |
| Wall Mount | Wall mount in multiple orientations via embedded mounting holes |
| DIN Rail Mount | DIN rail mount via included plastic bracket (TH 35, IEC60715) |
Enclosure
| IP Rating | IP41 rated |
Compliance
| Environmental | RoHS and REACH (NTC-220 Series) |
| Certifications | FCC, ISED, CE, UKCA and E-Mark certification documents for NTC-227 |
Interfaces
| USB | 1 x Micro USB 2.0 OTG interface with 0.5A supply capability |
| Io Pins | I/O terminal block with 3 x multipurpose I/O pins |
| Ethernet | 1 x 100Base-T Ethernet RJ45 port |
| Namur Input | NAMUR (EN 60947-5-6 / IEC 60947-5-6) compatible sensor input |
| Serial Port | 1 x RS232 serial port, DB-9 female DCE |
| Reset Button | Recessed reset button: reboot, reboot into recovery mode, reset to factory defaults |
| Serial Modes | 9-wire RS232 or RS485/RS422 (software selectable) |
| Digital Input | Digital input (measurement of voltage above/below threshold) |
| Analogue Input | Analogue 0V to 30V input |
| Ignition Input | 1 x ignition digital input |
| RS-485 Termination | Software-controlled termination resistors for RS485 |
| Open Collector Output | Open collector output |
Sms Control
| Security | Secure SMS management using sender whitelisting and password management |
| Status Queries | Query status via SMS (signal strength, WAN IP, uptime and more) |
| Remote Commands | Execute commands via SMS (reboot, reset to defaults, go offline and more) |
| Acknowledgements | SMS acknowledgement replies for queries and commands |
| Remote Configuration | Configure via SMS (APN, authentication settings and more) |
Environmental
| Operating Humidity | 0% to 95% |
| Storage Temperature | -40°C to +85°C |
| Operating Temperature | -40°C to +70°C |
Administration
| NTP | NTP server support for system clock sync |
| SNMP | SNMP v1/v2/v3 including cellular-specific MIB, config and firmware download |
| Tr069 | TR-069 client for remote configuration, backup/restore and firmware upgrade |
| Web Ui | Secure web-based user interface (HTTPS) for full status and configuration |
| SSH CLI | SSH command line interface |
| Sms Client | SMS client (send/receive) with inbox and outbox |
| System Logs | System status and security logs |
| Config Backup | Password-protected configuration backup/restore for cloning |
| Ping Watchdog | Ping monitor watchdog (resets connection on repeated ping failure) |
| Diagnostic Logs | Diagnostic log viewer (remote and local) |
| Onboard User Guide | Device user guide stored on the device, accessible via HTTPS web UI |
Cellular Bands
| LTE Cat1 Bands | 4G LTE Cat-1: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B29, B40, B41 |
LED Indicators
| Leds | 8 x tri-color LEDs |
| LED Functions | Power, Network, a GPS/customizable LED and 5 x Signal Strength indicators |
| Status Display | LED display for connection status, connected network type and connection errors |
Peak Data Speed
| Edge | max 236.8 Kbps (DL) / max 236.8 Kbps (UL) (model dependent) |
| Gprs | max 85.6 Kbps (DL) / max 85.6 Kbps (UL) (model dependent) |
| Umts | max 384 Kbps (DL) / max 384 Kbps (UL) (model dependent) |
| LTE Fdd | max 10 Mbps (DL) / max 5 Mbps (UL) |
| LTE Tdd | max 8.96 Mbps (DL) / max 3.1 Mbps (UL) |
| DC Hspa Plus | max 42 Mbps (DL) / max 5.76 Mbps (UL) (model dependent) |
SIM Card Reader
| SIM Slot | 1 x SIM card slot, Mini USIM/SIM format (2FF) |
| Embedded SIM | Optional soldered-down SIM (ETSI MFF2 DFN-8 USIM) |
Antenna Connectors
| GPS | 1 x SMA connector for GPS |
| Cellular | 2 x SMA connectors for 4G/3G/2G (1 x Main, 1 x RX Diversity) |
Firmware Management
| Sms Triggered | SMS-triggered firmware upgrade (download and install from HTTPS) |
| Multiple Images | Multiple firmware image storage and dynamic install |
| Upgrade Methods | Firmware upgrade locally via LAN or over-the-air (HTTPS, SNMP, TR-069, LWM2M) |
Network And Routing
| Vrrp | VRRP for redundant router failover |
| Routing | Static routing, RIP (v1/v2), port forwarding and DMZ |
| DHCP List | DHCP list display in Web-UI |
| Custom DNS | Custom DNS server definitions |
| DHCP Relay | DHCP relay |
| DHCP Server | DHCP server including address reservation by MAC address |
| Dynamic DNS | Dynamic DNS |
| DHCP Options | Advanced DHCP options (Option 42 NTP, Option 66 TFTP, Option 150, Option 160) |
| Modbus Frames | Modbus RTU/ASCII frames support |
| Modbus Gateway | Modbus server TCP/IP gateway and client TCP/IP agent, up to 247 slaves on the serial gateway |
| Data Stream Manager | Data Stream Manager for mapping and processing between ports (serial, SMS, USB) via virtual tunnels |
Processor And Storage
| Ram | 256 MB RAM |
| Flash | 512 MB flash memory storage |
| Processor | 1 GHz ARM Cortex A8 processor |
Antenna Specifications
| VSWR | VSWR < 3.0:1 |
| Height | 201 mm |
| Frequency | 698-2700 MHz |
| Maximum Gain | 4.71 dBi (NANT-00001); 3.24 dBi (NANT-00006) |
| Radome Diameter | 17 mm radome diameter |
Software Development Kit
| API | API (C, LUA and Shell libraries) to the internal runtime database |
| Languages | Applications/scripting in ANSI C, shell script and LUA |
| Environment | Open Linux standard development environment |
| Package Manager | Package manager in Web-UI for application install/removal |
| Custom Applications | Develop and install custom software applications |
Frequently Asked Questions
Which LTE bands does the NTC-227 support?▾
The NTC-227 global model supports LTE Cat-1 bands B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B29, B40 and B41.
How many Ethernet ports does it have?▾
It has one 100Base-T Ethernet RJ45 port, plus a DB-9 serial port, a Micro USB 2.0 OTG port and a terminal block with three multipurpose I/O pins and an ignition input.
Can it be installed in a vehicle?▾
Yes. It accepts 8-40V DC with ISO7637 vehicle-compatible protection, has a dedicated ignition input and reports odometer readings from its integrated GNSS.
Can I run my own software on the router?▾
Yes. It runs Linux-based Lantronix OS, and the SDK supports custom applications in ANSI C, shell script and LUA, installed through a package manager in the web UI.
Does it support Modbus?▾
Yes. It provides a Modbus server TCP/IP gateway and client TCP/IP agent supporting up to 247 slaves on the serial gateway, with Modbus RTU/ASCII frame support.
Related Products
Lantronix EMEA, APAC excl. Japan & China 5G Industrial IOT Gateway (RoW)
Lantronix · NTC-552-01-01
$599.00
Out of Stock
Lantronix North America 5G Release 16 Sub 6 Industrial Grade 5 Port Router with WiFi
Lantronix · NTC-551-01-01
$599.00
Out of Stock
Lantronix Accessory Bundle E225G MKII, KDC22 Power CORD, A14M0 &A21H0 X2 ANTENNA, BR351 D
Lantronix · MF16
$74.79
Out of Stock
Lantronix Accessory Bundle E228G MKII, E224, KDC22 Power CORD, 2X A22H0 A21H0, BR351
Lantronix · MF17
$70.67
Out of Stock
Lantronix Cable ACCESSORY, ETHERNET, CAT5E, 10 FOOT
Lantronix · ACC-500-110-R
$17.33
Out of Stock