Lantronix
SBFTF1011-105-LA standalone Fast Ethernet media converter with ST multimode optics

Lantronix SBFTF1011-105-LA — Fast Ethernet Media Converter With ST Multimode

Lantronix|

MPN: SBFTF1011-105-LA

|

UPC: 648177025213

Low Stock (1 left)
$215.37$286.00

Ships from and sold by A5 IT

Free 2-3 Day Shipping within the United StatesArrives by Thursday, Nov 12
New, with full manufacturer warranty
Conversion
10/100BTX to 100BFX
Fiber
Multimode
Optical format
1x9
Form factor
Standalone media converter
Ethernet class
Fast Ethernet

Who it's for

Is the SBFTF1011-105-LA the right part?

For an integrator maintaining an ST multimode installation, this configuration provides a defined copper and fiber boundary without requiring a wholesale change to attached equipment. Select it around the existing 10/100BTX connection, the 100BFX fiber service and the required 1x9 optical format. Its standalone construction and 3.3 V design are specific hardware details to carry into a replacement specification.

Ordering

Which SKU do I need?

Part numberWhat’s differentPrice
SBFTF1011-105-LAThis pageFast Ethernet Media Converter With ST Multimode$215.37

Start With the Existing Fiber Termination

ST connectivity is the first selection point for SBFTF1011-105-LA. This configuration uses multimode fiber and a 1x9 optical interface, so the fiber termination and optical format should both appear in the installation specification. For a replacement project, check these details against the installed converter before ordering.

The exact combination matters when maintaining older equipment: specifying only a Fast Ethernet converter leaves the optical connection undecided.

Define the Copper and Fiber Boundary

The copper side is identified as 10/100BTX, while the fiber side is 100BFX. This gives the installation a media conversion point between the two cable types. It fits projects that retain copper-connected equipment while adding or continuing a multimode fiber segment.

Document both network designations in the bill of materials so that the converter is selected for the required Ethernet service as well as the connector.

Carry the Hardware Details Into the Order

The unit is specified as a standalone media converter, with a 3.3 V hardware design. Treat the enclosure format, optical assembly and voltage designation as separate selection details when matching an existing installation.

Use the full SBFTF1011-105-LA ordering code and UPC 648177025213 for procurement. Together with the ST and multimode requirements, these identifiers keep the intended configuration explicit throughout purchasing and replacement records.

Choose this part if…

  • Choose this part if your copper connection is 10/100BTX.
  • Pick this SKU when the fiber service is 100BFX multimode.
  • Choose this part if the installation requires ST connectivity.
  • Pick this SKU when the required optical format is 1x9.
  • Choose this part if a standalone converter with the listed 3.3 V design matches your hardware specification.

Technical data

SBFTF1011-105-LA specifications

Network conversion

Network technology10/100BTX to 100BFX
Ethernet technologyFast Ethernet

Optics

Optical format1x9
Fiber typeMultimode
Fiber connectorST

Hardware

Form factorStandalone media converter
Design voltage3.3 V

Ordering

Part numberSBFTF1011-105-LA
UPC648177025213

Questions

SBFTF1011-105-LA FAQ

Which connector should I match on the installed fiber cable?

Match an ST termination. This configuration specifies ST connectivity with multimode fiber.

What optical assembly format belongs on the replacement specification?

The listed optical format is 1x9.

Is the enclosure format standalone?

Yes. The structured specification identifies a standalone media converter.

Which identifier can purchasing use to confirm the exact item?

Use the complete part number SBFTF1011-105-LA and UPC 648177025213.