Lantronix
Lantronix NM2-GXE-201 Series M.2 Gigabit Ethernet Fiber NIC with LC fiber adapter

Lantronix NM2-GXE-2230-LC-201A — NM2-GXE-201 Series M.2 Gigabit Fiber NIC

Lantronix|

MPN: NM2-GXE-2230-LC-201A

|

UPC: 648177044283

Available on Backorder
$255.12$380.00

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty

Key Features

  • 1000Base-SX LC fiber interface at 850nm over multimode fiber
  • 8.0 dB link budget for the LC configuration
  • 550 m/1804 ft. reach on 50/125 μm fiber and 220 m/722 ft. on 62.5/125 μm fiber
  • M.2 ‘2230-D4-A-E’ A + E keyed interface
  • 1000 Mbps data rate in full duplex only mode
  • 9014-byte jumbo frame support
  • Windows 10, 8, 8.1, and 7 (32/64 bit); Linux software support
Lantronix NM2-GXE-2230-LC-201A is an M.2 Gigabit Ethernet Fiber Network Interface Card for OptiPlex 7080/7090 65W Systems. It provides a 1000Base-SX 850nm multimode LC fiber interface with an 8.0 dB link budget. The NM2-GXE-2230-xx-201 Series consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, a fiber optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable that connects the NIC to the fiber adapter. This LC configuration supports 220 m/722 ft. on 62.5/125 μm fiber and 550 m/1804 ft. on 50/125 μm fiber. Series features include full duplex, flow control, Wake on LAN, LACP support, IPv6 capability, UEFI support, PXE boot support, and 9014-byte jumbo frame support.

Ideal For

  • Adding a 1000Base-SX LC fiber interface to OptiPlex 7080/7090 65W Micro PCs
  • Fiber-to-the-desk deployments that use 50/125 μm or 62.5/125 μm multimode fiber
  • Gigabit multimode links up to 550 m/1804 ft. on 50/125 μm fiber
  • Network boot deployments that use PXE boot support on supported OptiPlex Micro PCs

Specifications

Weight0.1 lbs. [0.05 kg]
Altitude0 – 10,000 ft
Bus SlotM.2 – ‘2230-D4-A-E’
Humidity5% to 95% (non-condensing)
ImmunityEN55024
StandardIEEE 802.3-2012
Data Rate1000 Mbps (full duplex only)
EmissionsEN55032, FCC Part 15 Class B
Fiber ModeMultimode
Status LEDLINK/ACT
Wavelength850nm
Link Budget8.0 dB
Power SourceM.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification)
CertificationCE Mark
Host InterfaceM.2
Max Frame Size9014 bytes
Fiber ConnectorLC
Ffc Cable Length4.911” [124.74 mm]
Software SupportWindows 10, 8, 8.1, and 7 (32/64 bit); Linux
M2 NIC Dimensions0.87” [22 mm] x 1.18” [30 mm] x 0.12” [3.08 mm]
Power ConsumptionLC: 250mA @ 3.3V (0.8 Watts typical)
Ethernet Interface1000Base-SX
Status LED On StateON = Link
Storage Temperature-40°C to 85°C
System CompatibilityOptiPlex 7080/7090 65W Systems
Operating Temperature0°C to +45°C
Fiber Distance 50 125 μM550 m/1804 ft
Status LED Flashing StateFlashing = Activity
Fiber Distance 625 125 μM220 m/722 ft
Fiber Interface Dimensions1.65” [42 mm] x 2.05” [52 mm] x 0.51” [13 mm]

Frequently Asked Questions

Which OptiPlex systems is this SKU for?▾

This SKU is listed for OptiPlex 7080/7090 65W Systems.

What fiber interface does it provide?▾

It provides a 1000Base-SX 850nm multimode LC fiber interface with an 8.0 dB link budget.

What multimode fiber distances are listed?▾

The LC configuration supports 220 m/722 ft. on 62.5/125 μm fiber and 550 m/1804 ft. on 50/125 μm fiber.

What operating systems are supported?▾

Software support is listed for Windows 10, 8, 8.1, and 7 (32/64 bit); Linux.