Lantronix XPCW1002100B — xPico Wi-Fi SMT Device Server Module
$30.95
Ships from and sold by A5 IT
Available on backorder — ships as soon as stock arrives
Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Key Features
- 2.4 GHz Wi-Fi interface supports IEEE 802.11 b/g and IEEE 802.11n (single stream), plus IEEE 802.11 d/h/i
- Dual serial interface provides two Serial CMOS Ports (3.3V, 5V tolerant) with 300 to 921.6 Kbps data rate
- Host interfaces include Dual Serial Port, SPI, USB 2.0* (device), and 8 GPIO
- Soft Access Point with DHCP Server supports the module’s access point networking capability
- Low-power operation uses 3.3VDC input with approximately 6μA standby consumption
- Extended temperature operation is -40° to +85° C; operation over +70° C requires a thermal pad
- 40-pin Board-to-Board SMT Connector supports the xPico Wi-Fi SMT configuration
- Simplifies Wi-Fi implementation and integration resulting in faster product design
Lantronix XPCW1002100B is the xPico Wi-Fi SMT device server module for adding IEEE 802.11 b/g/n WLAN connectivity to products with serial, SPI, or USB interfaces. This Extended Temp, SMT, Bulk, RoHS configuration is listed in the xPico Wi-Fi SMT group. The module provides a 2.4 GHz IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface, IEEE 802.11 d/h/i support, and a u.FL connector for an external antenna. It supports Soft Access Point with DHCP Server, WPA-Personal, WPA2-Personal, and 256-bit AES Encryption*. Host options include Dual Serial Port, SPI, USB 2.0* (device), and 8 GPIO. The serial interface provides two Serial CMOS Ports (3.3V, 5V tolerant) at 300 to 921.6 Kbps with XON/XOFF and RTS/CTS flow control on SPort 1. For deployment and service, xPico Wi-Fi includes a Landing Page web server, CLI through the Serial Monitor Port, XML import and Export (XCR), and field upgradable firmware (OTA).
Ideal For
- Adding Wi-Fi connectivity to designs with a serial, SPI, or USB interface
- Providing smartphone or web browser configuration for headless products through Soft AP and client mode
- Building mobile M2M and IoT applications with an embedded xPico Wi-Fi module
- Enabling remote access to device data from wired or wireless connections
Specifications
| Gpio | 8 GPIO |
| Model | XPico Wi-Fi SMT |
| Memory | 1MB Flash and 128 KB SRAM |
| Processor | ARM Cortex M3 class processor with on-chip Flash and SRAM |
| Encryption | 256-bit AES Encryption* |
| Web Server | Landing Page |
| Serial Ports | Two Serial CMOS Ports (3.3V, 5V tolerant) |
| Configuration | Extended Temp, SMT, Bulk, RoHS |
| Input Voltage | 3.3VDC |
| Host Interface | Dual Serial Port, SPI, USB 2.0* (device) |
| Product Family | XPico Wi-Fi |
| Firmware Updates | Field upgradable firmware (OTA) |
| Serial Data Rate | 300 to 921.6 Kbps |
| Antenna Connector | U.FL connector for external antenna |
| Network Protocols | TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1 |
| Relative Humidity | 0% to 90% non-condensing |
| Spi Flash Storage | 1MB SPI Flash storage |
| Xml Configuration | XML import and Export (XCR) |
| Physical Interface | 40-pin Board-to-Board SMT Connector |
| Serial Application | Lantronix tunneling application |
| IEEE 80211i Support | WPA-Personal, WPA2-Personal |
| Serial Flow Control | XON/XOFF, RTS/CTS (SPort 1 only) |
| Storage Temperature | -40° to +85° C |
| Thermal Requirement | For operation over +70° C a thermal pad is required |
| Management Interface | CLI (Serial Monitor Port) |
| Networking Capability | Soft Access Point with DHCP Server |
| Operating Temperature | -40° to +85° C |
| Wireless LAN Interface | IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only) |
| Wireless LAN Standards | IEEE 802.11 d/h/i |
| Standby Power Consumption | Low power consumption of approximately 6μA standby |
Documentation
xPico Wi-Fi – Product Brief
xPico Wi-Fi – Product Brief (A4)
xPico Wi-Fi Freescale Tower System Module – Product Brief
xPico Wi-Fi Freescale Tower System Module – Product Brief (A4)
xPico Wi-Fi SMT – Product Brief (A4)
xPico Wi-Fi SMT Model – Product Brief
xPico Wi-Fi Shield – Product Brief
xPico Wi-Fi Shield – Product Brief (A4)
Frequently Asked Questions
Is XPCW1002100B the SMT version of xPico Wi-Fi?▾
Yes. The Lantronix part row names this SKU as xPico Wi-Fi SMT, and the description lists SMT, Bulk, RoHS.
Which Wi-Fi standards does this module support?▾
It supports IEEE 802.11 b/g and IEEE 802.11n (single stream) on 2.4 GHz, plus IEEE 802.11 d/h/i.
What host interfaces are available?▾
Host interfaces include Dual Serial Port, SPI, USB 2.0* (device), and 8 GPIO.
What is the operating temperature range?▾
The operating temperature is -40° to +85° C. For operation over +70° C, a thermal pad is required.
Related Products
Save 16%Lantronix EDS2100 2 Port Secure Device SERVER, INTERNATIONAL PSU, ROHS
Lantronix · ED2100002-01
$252.85$300.46
Out of Stock
Save 12%Lantronix EDS4100 four-port device server 4 Port PoE, INTERNATIONAL
Lantronix · ED41000P2-01
$436.17$493.48
In StockFree 2-3 Day
Save 10%Lantronix EDS4100 four-port device server 4 Port POE, NO Power SUPPLY, ROHS
Lantronix · ED41000P0-01
$393.45$437.97
Out of Stock
Save 32%Lantronix DB9F to Null modem cable ACCESSORY, to 6FT, With Label P/N 460-347-054
Lantronix · ACC-500-164-R
$15.84$23.39
Out of Stock
Save 32%Lantronix ACCESSORY, POWER CORD, PACKAGED, AUSTRALIA, HOSPITAL GRADE, 250VAC 10A, 8FT, ROH
Lantronix · ACC-930-076-R
$60.65$88.94
Out of Stock