Lantronix
Lantronix xPico Wi-Fi IEEE 802.11 b/g/n device server module sample XPW100100S-01

Lantronix XPW100100S-01 — xPico Wi-Fi (Sample) Module

Lantronix|

MPN: XPW100100S-01

Available on Backorder
$47.29

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty

Key Features

  • IEEE 802.11 b/g/n connectivity with IEEE 802.11n single stream WLAN interface at 2.4 GHz only
  • Dual Serial Port, SPI and USB 2.0* device host interface with 8 GPIO
  • Two Serial CMOS Ports with 300 to 921.6 Kbps data rate
  • Soft Access Point with DHCP Server and simultaneous Soft AP and client mode
  • WPA-Personal, WPA2-Personal and 256-bit AES Encryption* security
  • 3.3VDC input voltage with approximately 6μA standby power consumption
  • Simplifies Wi-Fi implementation and integration resulting in faster product design
  • Delivers unmatched flexibility with a compact footprint, low power consumption and 2 mounting options
Lantronix XPW100100S-01 is an xPico Wi-Fi sample device server module for IEEE 802.11 b/g/n connectivity. The Lantronix part row identifies this SKU as Extended Temp, Sample, RoHS.

Ideal For

  • Adding Wi-Fi connectivity to a design with a SPI, USB or serial interface
  • Mobile M2M and IoT applications using an embedded Wi-Fi device server
  • Headless product setup and configuration through a smartphone or web browser
  • Designs requiring Soft Access Point with DHCP Server

Specifications

Gpio8 GPIO
Memory1MB Flash and 128 KB SRAM
SeriesXPico Wi-Fi
Weight2.5g
FirmwareField upgradable firmware (OTA)
SecurityWPA-Personal, WPA2-Personal
Warranty5-Year Limited
ProcessorARM Cortex M3 class processor with on-chip Flash and SRAM
Dimensions24mm (L) x 16.5mm (W) x 5.64mm (H)
Encryption256-bit AES Encryption*
ManagementCLI (Serial Monitor Port)
QuickconnectDynamic Profiles facilitate easy and rapid connections to access points
Storage Temp-40° to +85° C
Flash Storage1MB SPI Flash storage
Input Voltage3.3VDC
Standby PowerLow power consumption of approximately 6μA standby
CertificationsFCC Class B, UL and EN EMC, Japan
Host InterfaceDual Serial Port, SPI, USB 2.0* (device)
Operating Temp-40° to +85° C
Serial Data Rate300 to 921.6 Kbps
Serial InterfaceTwo Serial CMOS Ports (3.3V, 5V tolerant)
Antenna ConnectorU.FL connector for external antenna
Network ProtocolsTCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1
Relative Humidity0% to 90% non-condensing
Physical Interface40-pin Board-to-Board SMT Connector
Wireless StandardsIEEE 802.11 d/h/i
Serial Flow ControlXON/XOFF, RTS/CTS (SPort 1 only)
Thermal RequirementFor operation over +70° C a thermal pad is required
Wireless LAN InterfaceIEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
Networking CapabilitiesSoft Access Point with DHCP Server

Frequently Asked Questions

Is XPW100100S-01 a sample SKU?▾

Yes. The Lantronix part row identifies XPW100100S-01 as xPico Wi-Fi (Sample).

What host interfaces does this xPico Wi-Fi module support?▾

It supports Dual Serial Port, SPI, USB 2.0* (device), and 8 GPIO.

What operating temperature range is listed for this module?▾

The operating temperature is -40° to +85° C. For operation over +70° C a thermal pad is required.

What antenna connector does the module use?▾

The wireless LAN interface includes a u.FL connector for external antenna.