Lantronix
Lantronix xPico Wi-Fi SMT device server module with on-module antenna

Lantronix XPCW1003100S — xPico Wi-Fi SMT w/ Antenna (Sample) Module

Lantronix|

MPN: XPCW1003100S

Available on Backorder
$33.73

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty

Key Features

  • 2.4 GHz Wi-Fi: IEEE 802.11 b/g and IEEE 802.11n single stream WLAN interface
  • Device server module: IEEE 802.11 b/g/n Device Server Module in an SMT sample configuration
  • Host interface: Dual Serial Port, SPI, USB 2.0* (device) and 8 GPIO
  • Serial connectivity: Two Serial CMOS Ports with 300 to 921.6 Kbps data rate
  • Networking mode: Soft Access Point with DHCP Server and QuickConnect Dynamic Profiles
  • Security: WPA-Personal, WPA2-Personal and 256-bit AES Encryption*
  • Extended temperature operation: -40° to +85° C, with a thermal pad required over +70° C
  • Simplifies Wi-Fi implementation and integration resulting in faster product design
Lantronix xPico Wi-Fi SMT with on-module antenna is an IEEE 802.11 b/g/n device server module for M2M and IoT applications. XPCW1003100S is the sample version and is listed as RoHS.

Ideal For

  • Adding 2.4 GHz Wi-Fi connectivity to device designs with SPI, USB or serial interface
  • Mobile M2M applications using an embedded xPico Wi-Fi device server module
  • Headless product setup through a smartphone or web browser using simultaneous Soft AP and Client mode
  • Serial tunneling applications using the Lantronix tunneling application

Specifications

Gpio8 GPIO
Memory1MB Flash and 128 KB SRAM
SeriesXPico Wi-Fi
Storage1MB SPI Flash storage
Security256-bit AES Encryption*
ProcessorARM Cortex M3 class processor with on-chip Flash and SRAM
Web ServerLanding Page
Module TypeIEEE 802.11 b/g/n Device Server Module
QuickconnectDynamic Profiles facilitate easy and rapid connections to access points
Serial PortsTwo Serial CMOS Ports (3.3V, 5V tolerant)
Storage Temp-40° to +85° C
ConfigurationExtended Temp, w/ on-module Antenna SMT, Sample, RoHS
Input Voltage3.3VDC
CertificationsFCC Class B, UL and EN EMC, Japan
Host InterfaceDual Serial Port, SPI, USB 2.0* (device)
Operating Temp-40° to +85° C
Serial Data Rate300 to 921.6 Kbps
Antenna ConnectorU.FL connector for external antenna
Network ProtocolsTCP/IP, UDP/IP, DHCP, ARP, ICMP, Auto-IP, DNS, SNMPv1
Relative Humidity0% to 90% non-condensing
Physical Interface40-pin Board-to-Board SMT Connector
Serial ApplicationLantronix tunneling application
Wireless StandardsIEEE 802.11 d/h/i
IEEE 80211i SupportWPA-Personal, WPA2-Personal
Serial Flow ControlXON/XOFF, RTS/CTS (SPort 1 only)
Thermal RequirementFor operation over +70° C a thermal pad is required
Management And ControlCLI (Serial Monitor Port); XML import and Export (XCR); Field upgradable firmware (OTA)
Wireless LAN InterfaceIEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
Networking CapabilitiesSoft Access Point with DHCP Server
Standby Power ConsumptionLow power consumption of approximately 6μA standby

Frequently Asked Questions

Which Wi-Fi standards does this module support?▾

It supports IEEE 802.11 b/g and IEEE 802.11n single stream WLAN on 2.4 GHz only. The Lantronix specs also list IEEE 802.11 d/h/i.

What host interfaces are available?▾

The host interface is Dual Serial Port, SPI, USB 2.0* (device), with 8 GPIO. The serial interface uses Two Serial CMOS Ports with 3.3V and 5V tolerant signaling.

What is the operating temperature range?▾

The operating temperature is -40° to +85° C. For operation over +70° C a thermal pad is required.

Is this the sample version?▾

Yes. The Lantronix part row describes XPCW1003100S as xPico Wi-Fi SMT w/ Antenna (Sample).