Lantronix XPCW1002100K — xPico W1002 Wi-Fi SMT Evaluation Kit
$184.58
Ships from and sold by A5 IT
Available on backorder — ships as soon as stock arrives
Free 2-3 Day Shipping within the United StatesShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Key Features
- xPico Wi-Fi W1002 SMT module on carrier board for evaluation
- IEEE 802.11 b/g/n Wi-Fi with 2.4 GHz single-stream WLAN interface
- u.FL external antenna connector with antenna sample
- Two Serial CMOS ports with 300 to 921.6 Kbps data rate
- Dual Serial Port, SPI, USB 2.0* device and 8 GPIO host interfaces
- Soft Access Point with DHCP Server and QuickConnect Dynamic Profiles
- WPA-Personal, WPA2-Personal and 256-bit AES Encryption*
- Simplifies Wi-Fi implementation and integration resulting in faster product design
Lantronix xPico W1002 Wi-Fi SMT Evaluation Kit includes the xPico Wi-Fi W1002 Wi-Fi Module SMT on a carrier board, with U.FL and an antenna sample. It supports IEEE 802.11 b/g/n and uses the xPico Wi-Fi family’s compact Wi-Fi module platform. Designed for M2M and IoT applications, xPico Wi-Fi provides full IP and WLAN stacks, simultaneous Soft AP and client mode, and zero host load. It enables wireless LAN connectivity for designs with serial, SPI or USB interfaces. The module provides WPA-Personal, WPA2-Personal, 256-bit AES Encryption*, CLI through the Serial Monitor Port, XML import and Export (XCR), and field upgradable firmware (OTA).
Ideal For
- Evaluating xPico Wi-Fi W1002 SMT integration on a carrier board
- Adding Wi-Fi connectivity to M2M and IoT products with serial, SPI or USB interfaces
- Configuring headless products through simultaneous Soft AP and client mode
- Testing WPA-Personal, WPA2-Personal and 256-bit AES Encryption* support
Specifications
| Gpio | 8 GPIO |
| Memory | 1MB Flash and 128 KB SRAM |
| Firmware | Field upgradable firmware (OTA) |
| Security | 256-bit AES Encryption* |
| Processor | ARM Cortex M3 class processor with on-chip Flash and SRAM |
| Management | CLI (Serial Monitor Port) |
| Web Server | Landing Page |
| Flow Control | XON/XOFF, RTS/CTS (SPort 1 only) |
| Quickconnect | Dynamic Profiles facilitate easy and rapid connections to access points |
| Storage Temp | -40° to +85° C |
| Configuration | XML import and Export (XCR) |
| Input Voltage | 3.3VDC |
| Product Group | XPico Wi-Fi SMT |
| Standby Power | Low power consumption of approximately 6μA standby |
| USB Interface | USB 2.0* (device) |
| Host Interface | Dual Serial Port; SPI |
| Operating Temp | -40° to +85° C |
| Included Module | XPico Wi-Fi W1002 Wi-Fi Module SMT on Carrier Board |
| Included Antenna | Antenna sample |
| Serial Data Rate | 300 to 921.6 Kbps |
| Serial Interface | Two Serial CMOS Ports (3.3V, 5V tolerant) |
| Antenna Connector | U.FL connector for external antenna |
| Network Protocols | TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1 |
| Spi Flash Storage | 1MB SPI Flash storage |
| Wireless Standard | IEEE 802.11 d/h/i |
| Physical Interface | 40-pin Board-to-Board SMT Connector |
| IEEE 80211i Support | WPA-Personal, WPA2-Personal |
| Thermal Requirement | For operation over +70° C a thermal pad is required |
| Networking Capability | Soft Access Point with DHCP Server |
| Wireless LAN Interface | IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only) |
Documentation
xPico Wi-Fi – Product Brief
xPico Wi-Fi – Product Brief (A4)
xPico Wi-Fi Freescale Tower System Module – Product Brief
xPico Wi-Fi Freescale Tower System Module – Product Brief (A4)
xPico Wi-Fi SMT – Product Brief (A4)
xPico Wi-Fi SMT Model – Product Brief
xPico Wi-Fi Shield – Product Brief
xPico Wi-Fi Shield – Product Brief (A4)
Frequently Asked Questions
What is included with XPCW1002100K?▾
It includes the xPico Wi-Fi W1002 Wi-Fi Module SMT on a carrier board, with U.FL and an antenna sample.
Which Wi-Fi standards does it support?▾
The wireless LAN interface supports IEEE 802.11 b/g and IEEE 802.11n single stream on 2.4 GHz only, plus IEEE 802.11 d/h/i.
What host interfaces are available?▾
Host interfaces include Dual Serial Port, SPI, USB 2.0* device, and 8 GPIO.
What power input does the module use?▾
The input voltage is 3.3VDC. The listed standby power consumption is approximately 6μA.
Related Products
Lantronix EDS1100 1 Port Secure Device SERVER, INTERNATIONAL, PSU, ROHS
Lantronix · ED1100002-01
$247.30
In StockFree 2-3 Day
Lantronix XPress-DR 2 Port Industrial Automation Device SERVER, ROHS
Lantronix · XSDR22000-01
$349.88
In StockFree 2-3 Day
Lantronix EDS2100 2 Port Secure Device SERVER, INTERNATIONAL PSU, ROHS
Lantronix · ED2100002-01
$300.46
Out of Stock
Lantronix EDS4100 four-port device server 4 Port POE, International Power SUPPLY, ROHS
Lantronix · ED41000P2-01
$493.48
In StockFree 2-3 Day
Lantronix EDS4100 four-port device server 4 Port POE, NO Power SUPPLY, ROHS
Lantronix · ED41000P0-01
$437.97
Out of Stock