Lantronix C2110-1014 — Media Converter Module
$397.03$591.15
Ships from and sold by A5 IT
Available on backorder — ships as soon as stock arrives
Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Key Features
- 100Base-TX RJ-45 to 100Base-FX 1310nm single mode SC conversion
- 20 km/12.4 mi. fiber reach with 16.0 dB link budget
- 100 Mbps Layer 1 data rate
- Auto-Negotiation of speed and duplex on TP port
- Auto-MDI/MDIX on TP port
- Link Pass Through (LPT) and Far-End-Fault (FEF) detection
- Manageable Features when used in an ION Platform chassis along with an ION Management Module
Lantronix C2110-1014 is an ION Fast Ethernet Media Converter Module for converting 100Base-TX (RJ-45) to 100Base-FX 1310nm single mode fiber with an SC connector. This SKU supports 20 km/12.4 mi. fiber distance with a 16.0 dB link budget. The C2110 Series operates at 100 Mbps, Layer 1 and supports IEEE 802.3. Features include Auto-Negotiation of speed and duplex on the TP port, Auto-MDI/MDIX, Link Pass Through, Far-End-Fault detection, Automatic Link Restoration and Pause advertisement. C2110 Series modules can be used in any ION Platform Chassis. Manageable Features are available when the module is used in an ION Platform chassis along with an ION Management Module.
Ideal For
- Integrating fiber optic cabling into 100Base-TX copper environments
- Adding 100Base-FX 1310nm single mode SC fiber reach up to 20 km/12.4 mi
- Deploying manageable media conversion in an ION Platform chassis with an ION Management Module
- Connecting standard 100Base-TX and standard 100Base-FX ports
Specifications
| MTBF | Greater than 250,000 hours (MIL-HDBK-217F); Greater than 667,500 hours (Bellcore) |
| Depth | 6.5” [165 mm] |
| Width | 0.86” [22 mm] |
| Height | 3.4” [86 mm] |
| Weight | 1 lb. [0.45 kg] |
| Altitude | 0 – 10,000 ft |
| Humidity | 5% to 95% (non-condensing) |
| Warranty | Lifetime |
| Data Rate | 100 Mbps, Layer 1 |
| Standards | IEEE 802.3 |
| Switch Sw1 | Auto-Negotiation (UP = enabled) |
| Switch Sw2 | Pause (UP=enabled) |
| Switch Sw3 | Link Pass Through (UP = enabled) |
| Switch Sw4 | Far-End-Fault (FEF) (UP = enabled) |
| Link Budget | 16.0 dB |
| Certifications | CISPR/EN55022 Class A, FCC Class A, CE Mark |
| Fiber Interface | 100Base-FX 1310nm single mode (SC) [20 km/12.4 mi.] |
| Internal Jumper | Auto-MDI/MDIX: Enable/Disable |
| Copper Interface | 100Base-TX (RJ-45) [100 m/328 ft.] |
| Power Consumption | 2.7 Watts, 230 mA @ 12 VDC |
| Operating Temperature | 0°C to 50°C |
Frequently Asked Questions
What copper and fiber interfaces does C2110-1014 provide?▾
C2110-1014 converts 100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1310nm single mode (SC) [20 km/12.4 mi.] with a 16.0 dB link budget.
Is the C2110-1014 manageable?▾
Yes. Manageable Features are available when used in an ION Platform chassis along with an ION Management Module.
What chassis does this module support?▾
The C2110 Series can be used in any ION Platform Chassis.
What standard and data rate does it support?▾
It supports IEEE 802.3 and operates at 100 Mbps, Layer 1.