Lantronix
Lantronix C2110-1039 C2110 Series Fast Ethernet media converter module with RJ-45 to multimode LC fiber

Lantronix C2110-1039 — Media Converter

Lantronix|

MPN: C2110-1039

|

UPC: 648177030651

Available on Backorder
$264.12$393.12

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Free 2-3 Day Shipping — no minimumShips as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty

Key Features

  • 100Base-TX to 100Base-FX conversion: RJ-45 [100 m/328 ft.] to 1300nm multimode LC fiber [2 km/1.2 mi.]
  • 100 Mbps Layer 1 operation: data rate listed at 100 Mbps, Layer 1
  • Auto-Negotiation on TP port: speed and duplex auto-negotiation supported
  • Auto-MDI/MDIX on TP port: enable/disable control through internal jumper
  • Link Pass Through and Far-End-Fault: SW3 enables LPT and SW4 enables FEF
  • ION Platform Chassis support: can be used in any ION Platform Chassis
  • Manageable Features: available when used in an ION Platform chassis along with an ION Management Module
Lantronix C2110-1039 is an ION Fast Ethernet media converter module that provides an interface between 100Base-TX ports and 100Base-FX ports. This SKU converts 100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (LC) [2 km/1.2 mi.] with an 11.0 dB link budget. The module operates at 100 Mbps, Layer 1. It supports Auto-Negotiation of speed and duplex on the TP port, Auto-MDI/MDIX on the TP port, Link Pass Through, Far-End-Fault detection, Automatic Link Restoration and Pause advertisement. C2110-1039 can be used in any ION Platform Chassis. Manageable Features are available when used in an ION Platform chassis along with an ION Management Module, including converter status reporting and write operations for settings such as Auto-Negotiation, LPT, FEF, Pause and Auto-MDI/MDIX.

Ideal For

  • Integrating fiber optic cabling into 100Base-TX copper environments
  • Extending 100Base-TX links over 100Base-FX 1300nm multimode LC fiber up to 2 km/1.2 mi
  • Managed ION chassis deployments that require TP and Fiber Link Status reporting
  • Standards-based connections to Standard 100Base-TX and Standard 100Base-FX ports

Specifications

Sw1Auto-Negotiation (UP = enabled)
Sw2Pause (UP=enabled)
Sw3Link Pass Through (UP = enabled)
Sw4Far-End-Fault (FEF) (UP = enabled)
PausePause advertisement
Weight1 lb. [0.45 kg]
Altitude0 – 10,000 ft
Humidity5% to 95% (non-condensing)
Data Rate100 Mbps, Layer 1
StandardsIEEE 802.3
Dimensions0.86” [22 mm] x 6.5” [165 mm] x 3.4” [86 mm]
Fiber ModeMultimode
Link Budget11.0 dB
Auto-mdi MdixTP port
MTBF BellcoreGreater than 667,500 hours
Fiber ConnectorLC
Internal JumperAuto-MDI/MDIX: Enable/Disable
Auto-negotiationSpeed and duplex on TP port
Fiber Wavelength1300nm
Maximum Distance2 km/1.2 mi.
Media Conversion100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (LC) [2 km/1.2 mi.]
Environment SpecsDependent on the chassis chosen
Link Pass ThroughLPT
Power Consumption2.7 Watts, 230 mA @ 12 VDC
MTBF Mil-hdbk-217fGreater than 250,000 hours
Manageable FeaturesAvailable when used in an ION Platform chassis along with an ION Management Module
Chassis CompatibilityAny ION Platform Chassis
Operating Temperature0°C to 50°C
Far-end-fault DetectionFEF
Field Upgradeable FirmwareSupported

Frequently Asked Questions

What does the C2110-1039 convert?▾

It converts 100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (LC) [2 km/1.2 mi.].

What fiber type and distance does C2110-1039 support?▾

This SKU uses 1300nm multimode fiber with an LC connector and supports [2 km/1.2 mi.] distance with an 11.0 dB link budget.

Can this module be used in an ION Platform Chassis?▾

Yes. The C2110 Series can be used in any ION Platform Chassis.

When are manageable features available?▾

Manageable Features are available when the module is used in an ION Platform chassis along with an ION Management Module.